![Image](https://c8.staticflickr.com/6/5517/30829597215_3a3310c96c.jpg)
#ahsokalives greaves wetmolding. I have since taken the tape off, wiped down the surface and trimmed the back seams. Next step is to let it dry fully and then wipe surface again.
![Image](https://c7.staticflickr.com/6/5450/30528813390_fe366df1ae.jpg)
#ahsokalives greaves, here you can see how well the leather forms. One piece each leg. I used cold water so still a few chances to texture and fine texture it all.[/url]
![Image](https://c2.staticflickr.com/6/5563/30829600305_5fc1155755.jpg)
#ahsokalives chest plate part 1: stretching leather to eliminate all excess folds.
![Image](https://c3.staticflickr.com/6/5756/30528699770_4170473177.jpg)
#ahsokalives chest plate part 2: oil clay to shape on same form. This is too soft to form over directly so to the next step.
![Image](https://c6.staticflickr.com/6/5545/30741834301_11718f89b9.jpg)
#ahsokalives chest plate part 3: streched fabric over clay and resinned- no, not with epoxy just polyester. Just enough to left me stretch the leather over it. I'll use a flexible urethane on the resverse of the leather. Or contact cement. Hmmmmm...