Hi all.
I thought I had better start posting some pics of the Tie Pilot Costume I am building. I had decided to do one that appeals to me and is "Personalized". I was going to post a link to my thread on the RPF, but decided to start one here.
So, without any further or do, here we go.
Got Blaxmyth to print off some Pepakura sheets of the X-Wing Helmet for me and cut everything out and glued together. This was the second attempt, as the first was too big. So he resized it and tweeked it a bit. After I had assembled the helmet, resin was then brushed onto the card to stiffen it and then fibreglass matt was put on the inside. Once it was dry, phil got his Trade Me purchase out and we compared the sizing. Amazingly, they were very close.
Another Tie Pilot Costume
- TIE1138
- Lieutenant
- Posts: 120
- Joined: Sat Aug 08, 2015 10:02 am
- Country: New Zealand
- Location: Wanganui
Another Tie Pilot Costume
- Attachments
-
- IMG_2068.JPG (2.95 MiB) Viewed 7762 times
-
- IMG_2069.JPG (3.22 MiB) Viewed 7762 times
-
- IMG_2067.JPG (3.15 MiB) Viewed 7762 times
-
- IMG_2065.JPG (3.01 MiB) Viewed 7762 times
-
- IMG_1723.JPG (2.34 MiB) Viewed 7764 times
-
- IMG_1722.JPG (2.23 MiB) Viewed 7764 times
- MattG
- Site Admin
- Posts: 4921
- Joined: Tue Nov 10, 2009 5:46 am
- Country: New Zealand
- Location: Auckland
Re: Another Tie Pilot Costume
That's looking really good!
Matt G
My Trade/Want List
Website: www.SWNZ.co.nz
Facebook: Facebook.com/StarWarsNZ
Twitter: @StarWarsNZ
My Trade/Want List
Website: www.SWNZ.co.nz
Facebook: Facebook.com/StarWarsNZ
Twitter: @StarWarsNZ
- Blaxmyth
- Commander
- Posts: 231
- Joined: Fri Oct 08, 2010 9:13 am
- Country: New Zealand
- Location: Wanganui
Re: Another Tie Pilot Costume
Glad you posted this, Nick.
This build is very impressive and I'm looking forward to seeing the rest of the pics. The finished helmet is really stunning!
This build is very impressive and I'm looking forward to seeing the rest of the pics. The finished helmet is really stunning!
- TIE1138
- Lieutenant
- Posts: 120
- Joined: Sat Aug 08, 2015 10:02 am
- Country: New Zealand
- Location: Wanganui
Re: Another Tie Pilot Costume
Next, I applied a lot of Builders Fill to the helmet after sanding the shell to round off the sharp edges. This was then sanded and filled and sanded and.. well you get the drift, until it was all smooth. I then marked the centerline down the middle of the Mohawk and cut gently but not all the way through so I could still prime and sand to a smooth finish before parting the two halves and applying the spacer piece.
- Attachments
-
- IMG_2152.JPG (1.84 MiB) Viewed 7710 times
-
- IMG_2146.JPG (2.7 MiB) Viewed 7710 times
-
- IMG_2134.JPG (2.58 MiB) Viewed 7710 times
-
- IMG_2132.JPG (2.74 MiB) Viewed 7710 times
-
- IMG_2131.JPG (2.55 MiB) Viewed 7710 times
-
- IMG_2130.JPG (2.54 MiB) Viewed 7710 times
-
- Commander
- Posts: 212
- Joined: Fri May 24, 2013 1:25 am
- Country: New Zealand
- Location: Auckland
Re: Another Tie Pilot Costume
This is amazing work.TIE1138 wrote:Next, I applied a lot of Builders Fill to the helmet after sanding the shell to round off the sharp edges. This was then sanded and filled and sanded and.. well you get the drift, until it was all smooth. I then marked the centerline down the middle of the Mohawk and cut gently but not all the way through so I could still prime and sand to a smooth finish before parting the two halves and applying the spacer piece.
You going to more copies for sale?
Peace is a lie, there is only passion.
Through passion, I gain strength.
Through strength, I gain power.
Through power, I gain victory.
Through victory, my chains are broken.
The Force shall free me.
Through passion, I gain strength.
Through strength, I gain power.
Through power, I gain victory.
Through victory, my chains are broken.
The Force shall free me.
- TIE1138
- Lieutenant
- Posts: 120
- Joined: Sat Aug 08, 2015 10:02 am
- Country: New Zealand
- Location: Wanganui
Re: Another Tie Pilot Costume
Unfortunately Edward26, this is a one off for me.
- TIE1138
- Lieutenant
- Posts: 120
- Joined: Sat Aug 08, 2015 10:02 am
- Country: New Zealand
- Location: Wanganui
Re: Another Tie Pilot Costume
Next I added detail to the bottom of the mohawk. As you can see in one of the pics, the parting line is definitely visible, which is what I wanted.
I then cut the helmet down the middle. This made it easier to work on each side and add missing details. Blaxmyth popped in from time to time and had a look at what I was doing, and said he liked the sharp crisp edges. I was trying to replicate the round edges, but then realized that they only came about because the helmets in question were Vac Formed over a Master.
Next time you see a Vac Form piece, have a look inside (sharp detail) and on the outside (round detail). So, this is where my personal signature came in. Keep everything nice and sharp. You will see this with the chest plate.
I then cut the helmet down the middle. This made it easier to work on each side and add missing details. Blaxmyth popped in from time to time and had a look at what I was doing, and said he liked the sharp crisp edges. I was trying to replicate the round edges, but then realized that they only came about because the helmets in question were Vac Formed over a Master.
Next time you see a Vac Form piece, have a look inside (sharp detail) and on the outside (round detail). So, this is where my personal signature came in. Keep everything nice and sharp. You will see this with the chest plate.
- Attachments
-
- IMG_2174.JPG (2.5 MiB) Viewed 7681 times
-
- IMG_2164.JPG (2.58 MiB) Viewed 7681 times
-
- IMG_2162.JPG (3.21 MiB) Viewed 7681 times
-
- IMG_2149.JPG (2.37 MiB) Viewed 7681 times
-
- IMG_2158.JPG (2.71 MiB) Viewed 7681 times
-
- IMG_2148.JPG (2.7 MiB) Viewed 7681 times
- badges2nz
- High Colonel
- Posts: 1047
- Joined: Fri Jul 23, 2010 11:35 am
- Country: New Zealand
- Location: Otaki
Re: Another Tie Pilot Costume
That is looking great, Nice work so far on this.
Be looking forward too seeing the face plate mounted.
Be looking forward too seeing the face plate mounted.
Doomsday and Armageddon got together and had a baby and man is it ugly.
- TIE1138
- Lieutenant
- Posts: 120
- Joined: Sat Aug 08, 2015 10:02 am
- Country: New Zealand
- Location: Wanganui
Re: Another Tie Pilot Costume
Thanks badges2nz. You'll get to see it person on Nov.7th, hopefully, when I come down with Blaxmyth.
- TIE1138
- Lieutenant
- Posts: 120
- Joined: Sat Aug 08, 2015 10:02 am
- Country: New Zealand
- Location: Wanganui
Re: Another Tie Pilot Costume
Started applying the mohawk strip to both sides of the helmet halves gluing them with SS Epoxy Glue and screwing in place until dry. When it was all done, I put the faceplate in to see what it would look like. Ah, the plan, she is starting to come together.
- Attachments
-
- IMG_2231.JPG (3.25 MiB) Viewed 7664 times
-
- IMG_2233.JPG (2.94 MiB) Viewed 7664 times
-
- IMG_2243.JPG (3.52 MiB) Viewed 7664 times
-
- IMG_2244.JPG (4.02 MiB) Viewed 7664 times